saw bandpass filter 433.92mhz part no. F4347 features z rf bandpass filter z single-ended operation z ceramic surface mounted device package ( 5.0 mm 5.0 mm ) 1.20.15 0.60.15 2.080.15 5.000.15 5.000.15 1.270.05 1 4 3 8 8 77 6 3 2 1 6 5 5 4 2 1.350.15 package dimensions itf 4347 pin configurations 2 input 6 output 1, 3, 4, 5, 7, 8 ground dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1. 0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range c -30 25 85 storage temperature range c -40 - 85 power handling capability dbm - - 10 electrostatics sensitive device ( esd) rev. date 2005-11-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns5009-ps01 1/6
saw bandpass filter 433.92mhz part no. F4347 preliminary specifications minimum typical maximum unit center frequency ( fc ) - 433.92 - mhz insertion loss - 3.0 5.5 db 3db bandwidth - 0.6 mhz - 30 15 attenuation fc -10.7mhz 50 40 fc -21.4mhz - db frequency temperature coefficient 0.032 ppm/ 2 temperature range (operational) -30 25 85 input/output impedance 50 ohms notes : 1) all specifications are based on th e matching schematic shown below, measur ed by agilent network analyzer and full 2 port calibration. 2) electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances rev. date 2005-11-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns5009-ps01 2/6
saw bandpass filter 433.92mhz part no. F4347 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) c2 c1 l2 l1 input 50 output 50 c1 , c2 = 10 pf l1, l2 = 43nh marking configuration itf 1) 4347 2) 1) manufacturer name 2) marking number * ink or laser marking available rev. date 2005-11-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns5009-ps01 3/6
saw bandpass filter 433.92mhz part no. F4347 typical performance ( at 25 ) rev. date 2005-11-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns5009-ps01 4/6
saw bandpass filter 433.92mhz part no. F4347 packing specification 1. reeling quantity : 1000 pcs / reel 2. taping structure : the tape shall be wound ar ound the reel in the direction shown below. reel top cover tape carrier tape tape specification 1. leader part and vacant position specification end start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 2. tensile strength of carrier tape 4.4n/mm width 0~15 degree top cover tape direction of pull carrier tape 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g rev. date 2005-11-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns5009-ps01 5/6
saw bandpass filter 433.92mhz part no. F4347 carrier tape dimensions [unit : mm] a 5.50 0.1 b 5.50 0.1 c 7.25 0.1 d 1.95 0.1 e 12.00 0.1 f 8.00 0.1 rev. date 2005-11-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ns5009-ps01 6/6 part direction tape running direction reel dimensions [unit : mm]
|
